Rear Terminal Mini Fuse & Relay
Power Distribution Module
The Rear Terminal Mini Fuse and Relay panel (RTMR) provides efficient power distribution in a rugged compact form for applications in marine, construction, agriculture, heavy trucking, specialty vehicles, etc. This innovative product offers a weather tight enclosure (IP66/67) for various MINI (2.8mm) blade components when cover, cable seals, and cavity plugs are installed. It is available with various degrees of internal electrical bussing. Additionally, custom labels and multiple hardware configurations are available to solve any application need.

SPECIFICATIONS
Input Terminal Rating: M6 input studs on bussed/ partially bussed inputs: 80A max input on bussed fuse side, 80A max input on bussed relay side.
Output Terminal Rating: 2.8mm blade terminals (30A max per terminal)
Temperature Rating: -40°F (-40°C) to 260°F (125°C).
Materials: Black UL-Rated 94V-0 thermoplastic housing;Tin-plated copper internal bussing; Bright nickel-plated brass studs (on bussed versions).
Termination: Delphi Packard Metri-Pack° 280 Series terminals (sealed/tangless) or Amp® terminals.* Delphi
Packard 280 Series cavity plugs are installed where wires are not used.* Accepts #12-22 AWG wire sizes
Torque Rating: 75in-lb (8.5Nm) max.
Mounting Torque Rating: #10-32 threaded inserts, 24in-lb (2.7Nm) max torque.
Ingress Protection Rating: IP66-IEC 60529 (Valid when properly installed with cover, sealed terminals, and cavity plugs.) IP67 (Same requirements as IP66, but also needs a periodic - 3-9 months - coating of silicone lubricant applied to green base seal.)

OPTIONS
End Caps: Protective silicone end caps available for studded versions.
Mounting: Mounting brackets available for surface-mounting RTMR.
Labels: Consult factory for custom label options.
Replacement Accessories: Consult factory for available service parts.

The 15600 ATC® fuse block is a compact, yet rugged, power distribution module. It is available in a single or dual internal buss electrical configuration featuring an optional ground pad terminal strip. The 15600 fuse block is surface mounted, uses convenient quick-connect terminals, and is recommended as a supplemental power distribution module. It can be used to accompany main PDMs such as the Bussmann 31000/32000 Series VEC/DVEC, 15710 Series RTA, and the 15301 Series RTMR.

SPECIFICATIONS
Input Terminal Rating: #10-32 threaded studs (100A max).
Output Terminal Rating: 30A max per circuit.
Temperature Rating: -20°F (0°C) to 150°F (65°C).
Materials: Black UL-Rated 94V-0 thermoplastic.
Termination:.250" x .032" quick-connect terminals.
Ground terminal pad option available.
Input wire size: #4-6 AWG.
Output wire size: #12-16 AWG.
Torque Rating: 20in-Ib (2.25Nm) max.
Mounting Torque Rating: 8in-lb (0.9Nm) max.

OPTIONS
Positions: 4-20 circuits available.
Split Power: Single or dual buss options.

The Rear Terminal ATC® Fuse Block (RTA) is a rear-fed panel with high component retention, which makes it an ideal choice for high vibration environments including construction, agriculture, bus, RV, heavy trucking equipment, etc. It is available in multiple lengths and internal bussing configurations. This allows for up to three separate power input circuits and 32 individual output circuits.

SPECIFICATIONS
Input Terminal Rating: 1/4-20 stud; Quick-connect terminals provided on middle bus (Series 15713). 200A max total input for unit.
Output Terminal Rating: 30A max load per circuit.
Temperature Rating: -40°F (-40°C) to 260°F (125°C).
Materials: Black UL-Rated 94V-0 thermoplastic.
Termination: Delphi Packard Pack-Con® Series 3 & 5."
Input Wire Size: #4-6 AWG. Output Wire Size: #10-16 AWG.
Torque Rating: 50in-Ib (5.6Nm) max.
Mounting Torque Rating: #10-32 threaded inserts, 24in-lb (2.7Nm) max torque.

OPTIONS
Positions: 8-32 circuits available.
Split Power: Single, dual, or triple bus options.
Cover: Splash-resistant covers available. Short cover for fuses only, and taller cover for use with circuit breakers.
Locks: Secondary locks available for securing of output terminals (#15710-TP). (Comes in multiples of 8 positions. Must order multiple strips to cover length of selected RTA.)
Tools: Output terminal removal tool (#HT15710-01). Secondary lock removal tool (#HT15710-02).